diy leadheads according to john1 : )

Fishing with Plugs, Spinners and other Artificials

Moderators: teacher, MAC

Message
Author
User avatar
lucky13
SAI Sea Dog!
Posts: 678
Joined: Sat Jan 28, 2012 1:26 pm
Favourite Rod: shakespeare hurricane
Favourite Reel: slosh20,jupiterz6000,penn 525
Favourite Fish: bass!!!!
Location: east cork
Has thanked: 211 times
Been thanked: 105 times

diy leadheads according to john1 : )

#1 Post by lucky13 »

heres my mould and my attempt,got all me stuff ready and no gas,feck it i was mad for road so i did it old skool 8) i will give them a sand and a bit of shaping yet and try and define them a bit.there are some flaws for sure,the mould "mark one" needs some tweaking too,as the more i poured,the neck around the hook eye gave way,causing the eye to fill with lead...happy angler i am tho for a first attempt at em... :D as you can see my mould deteriorated after 5 pours...the pic below shows the best to worst... :oops:
kudos again to john1 for pushing thoughts. :D
if anybody reading this spins leadheads,give it a go :wink:
You do not have the required permissions to view the files attached to this post.
Top
User avatar
lucky13
SAI Sea Dog!
Posts: 678
Joined: Sat Jan 28, 2012 1:26 pm
Favourite Rod: shakespeare hurricane
Favourite Reel: slosh20,jupiterz6000,penn 525
Favourite Fish: bass!!!!
Location: east cork
Has thanked: 211 times
Been thanked: 105 times

Re: diy leadheads according to john1 : )

#2 Post by lucky13 »

i got rid of the excess lead,gave 'em a little bit of a sand and came up with these two...
:D
You do not have the required permissions to view the files attached to this post.
Top
bassboy
SAI Hammerhead
Posts: 323
Joined: Tue Mar 06, 2012 9:32 pm
Has thanked: 73 times
Been thanked: 38 times

Re: diy leadheads according to john1 : )

#3 Post by bassboy »

Some nice work there:) well done:) hopefully you will get a few fish on them:)
Top
User avatar
lucky13
SAI Sea Dog!
Posts: 678
Joined: Sat Jan 28, 2012 1:26 pm
Favourite Rod: shakespeare hurricane
Favourite Reel: slosh20,jupiterz6000,penn 525
Favourite Fish: bass!!!!
Location: east cork
Has thanked: 211 times
Been thanked: 105 times

Re: diy leadheads according to john1 : )

#4 Post by lucky13 »

mould mark II...
5grms on a 1/0 aberdeen...
i'm messing with another bit of teak for a weedless version... :wink:
You do not have the required permissions to view the files attached to this post.
Top
User avatar
JOHN1
SAI Megalodon!
Posts: 3462
Joined: Tue Jan 09, 2007 12:59 am
Location: South Co. Dublin
Has thanked: 759 times
Been thanked: 454 times

Re: diy leadheads according to john1 : )

#5 Post by JOHN1 »

looking good, gets addictive dont it :)
Species Target (1) Anything will be a Bonus.

BallyBrack SAC.
Efsa Ireland.
Top
User avatar
jgraham768
SAI Bait Ball
Posts: 185
Joined: Sun Jul 22, 2012 5:42 pm
Favourite Rod: Abu Garcia Vendetta Cast
Favourite Reel: Abu Garcia Revo SX
Favourite Fish: Bassssss
Location: Dingle Co. Kerry
Has thanked: 20 times
Been thanked: 45 times

Re: diy leadheads according to john1 : )

#6 Post by jgraham768 »

Maybe if you put a small pin or nail through the eye of the hook to hold it you'd have it kept open after you pour the lead?
A bad days fishing is still better then a good day at the office.

Species of 2014 (1): Pollock

Species of 2013 (13): (coarse) Brown Trout, Seatrout, Salmon
(sea) Pollock, Mackerel, Cod, Ling, Bass, Dogfish, Coalie, Ballan Wrasse, Cuckoo Wrasse, Mullet

Species of 2012 (11): (coarse) brown trout, seatrout, pike, roach
(sea) mackerel, Spanish mackerel, pollock, cuckoo wrasse, coalie, cod, dogfish, bass
Top
User avatar
lucky13
SAI Sea Dog!
Posts: 678
Joined: Sat Jan 28, 2012 1:26 pm
Favourite Rod: shakespeare hurricane
Favourite Reel: slosh20,jupiterz6000,penn 525
Favourite Fish: bass!!!!
Location: east cork
Has thanked: 211 times
Been thanked: 105 times

Re: diy leadheads according to john1 : )

#7 Post by lucky13 »

JOHN1 wrote:looking good, gets addictive dont it :)
aw stop lad :D
must get a proper mask tho,those paper ones with the filter attached are kinda shite...
Top
User avatar
lucky13
SAI Sea Dog!
Posts: 678
Joined: Sat Jan 28, 2012 1:26 pm
Favourite Rod: shakespeare hurricane
Favourite Reel: slosh20,jupiterz6000,penn 525
Favourite Fish: bass!!!!
Location: east cork
Has thanked: 211 times
Been thanked: 105 times

Re: diy leadheads according to john1 : )

#8 Post by lucky13 »

jgraham768 wrote:Maybe if you put a small pin or nail through the eye of the hook to hold it you'd have it kept open after you pour the lead?
good idead lad,i just made a new mould tho..eliminated the flaw that way..the newest ones are coming out deadly!
Top
User avatar
Determined Dan
SAI Sea Dog!
Posts: 807
Joined: Sun Mar 14, 2010 3:07 pm
Favourite Rod: golds fx international
Favourite Reel: Mitchell avorun7500
Favourite Fish: Ray.+.flats
Location: mayo/galway.any where there is water.
Has thanked: 37 times
Been thanked: 74 times

Re: diy leadheads according to john1 : )

#9 Post by Determined Dan »

Hi John, just wondering dose the lead on the hook not slip down the shank of the hook when caught in weed when you pull through or have you a way to keep it caught on the hook? I've tryed putting lead shots on kaz b940 but its not holding on the hook. :x .
20107xthornback ray. {PB 14.5LB TB RAY} 1xpouting. 1xcodling.11xdogfish. 25xflounder.1xshore rock ling. 177xmac 4xturbot.1 bull huss.1sea trout. 1 MAYO BASS.2011. WHITING X9. COALIE X3. FLOUNDER X7. DOGGIE X8. THORNIEX3. CODLINGX1. SEA SCORPIONX1. 5 BEARDED ROCKLINGX4. SEATROUT X1. TURBOT X1. POLLACK X7. 3 BEARD ROCKLING .2012 SEATROUT X3. TURBOT X5. FLOUNDER X7. 3B,ROCKLINGX1.DOG .
. 2013.shore species ..... Flounder, dog conger pollack sea trout plaice. Gobyx3 wrasse cork wing wrasse Huss scorpion fish sp. coalie .
Top
User avatar
lucky13
SAI Sea Dog!
Posts: 678
Joined: Sat Jan 28, 2012 1:26 pm
Favourite Rod: shakespeare hurricane
Favourite Reel: slosh20,jupiterz6000,penn 525
Favourite Fish: bass!!!!
Location: east cork
Has thanked: 211 times
Been thanked: 105 times

Re: diy leadheads according to john1 : )

#10 Post by lucky13 »

Determined Dan wrote:Hi John, just wondering dose the lead on the hook not slip down the shank of the hook when caught in weed when you pull through or have you a way to keep it caught on the hook? I've tryed putting lead shots on kaz b940 but its not holding on the hook. :x .
i dont kow how john1 does it but on the aberdeens i cut small barbs into the hook shank,just below the eye,being careful not to go too deep and damage the hooks strength,before i pour the lead..they seem to hold well...havent had the chance to really test them properly yet tho,but johns seem to work grandest,he's caught on his :wink:
Top

Return to “Lure Fishing”