new rods
Moderator: donal domeney
-
kieran
- Site Admin/Owner
- Posts: 2511
- Joined: Wed Jan 15, 2003 11:27 pm
- Location: Mayo, Ireland
- Has thanked: 112 times
- Been thanked: 246 times
Re: new rods
Hi JG
You need to think about a few things - fixed spool or multiplier reel? any preference on the length? what species are you targeting?
People can then give you their opinions and experience based on that...
You need to think about a few things - fixed spool or multiplier reel? any preference on the length? what species are you targeting?
People can then give you their opinions and experience based on that...
-
mickser
- SAI Sea Dog!
- Posts: 414
- Joined: Tue Dec 01, 2009 10:45 pm
- Favourite Rod: ABU 464
- Favourite Reel: shimano tld 150
- Favourite Fish: plaice
- Location: dublin north
- Has thanked: 155 times
- Been thanked: 129 times
Re: new rods
Good selection here = http://www.henrystackleshop.com/budget- ... 2_137.html
I have not fished in two years hoping to change that this year with anything ?
-
patk
- SAI Sea Dog!
- Posts: 540
- Joined: Wed Oct 17, 2007 2:06 pm
- Location: CORK
- Has thanked: 13 times
- Been thanked: 34 times
Re: new rods
I would add also to think about a used rod also way more bang for your buck and once a new rod is fished once its used. They are made for long lives
-
jg123
- SAI Lug Worm
- Posts: 3
- Joined: Mon Mar 28, 2016 5:47 am
Re: new rods
kieran wrote:Hi JG
You need to think about a few things - fixed spool or multiplier reel? any preference on the length? what species are you targeting?
People can then give you their opinions and experience based on that...
ill just be using in for general beach fishing bass plaice etc and fixed spool
-
kieran
- Site Admin/Owner
- Posts: 2511
- Joined: Wed Jan 15, 2003 11:27 pm
- Location: Mayo, Ireland
- Has thanked: 112 times
- Been thanked: 246 times
Re: new rods
For that I would not go over € 100 and I would look at second hand rods, as you could pick up something very nice in that price range.
Go for a trusted brand - Daiwa, Greys, Shakespeare, Penn, Century, Shimano - and avoid the cheaper models like Leeda, Mitchell, Sonik and Silstar, or the named brands like Wilson and Thompson. There's usually nothing wrong with these in the main, but they tend just not to be as good quality in terms of materials, build and finish...
Think about the length of rod, and what you're comfortable with... and make sure its a rod that's suited to fixed spool as multipliers work better with different rings.
On a second hand rod: -
check the spigots (joints) for any looseness or wear and tear - stick your finger (cotton-bud) down to see if there's sand or other crap trapped in the holes, not a good sign
check the rings are aligned correctly and have no been replaced or if they have, ask who did it, when and why...
check that there are no cracks on the internal coating on the rings (will snap a line in every cast or tear it to death slowly)
check the rod is the correct length (one of mine is a few inches shorter owing to a car door!)
If there is a reel seat, check it also for cracks and any corrosion and that its works properly
If there is no reel seat, are you getting the coasters that you will use to connect the reel to the rod?
http://www.ebay.com/gds/Used-Fishing-Rod-Buying-Guide-/ might be of use although its primarily aimed at fresh water rods
Hope that helps...
Go for a trusted brand - Daiwa, Greys, Shakespeare, Penn, Century, Shimano - and avoid the cheaper models like Leeda, Mitchell, Sonik and Silstar, or the named brands like Wilson and Thompson. There's usually nothing wrong with these in the main, but they tend just not to be as good quality in terms of materials, build and finish...
Think about the length of rod, and what you're comfortable with... and make sure its a rod that's suited to fixed spool as multipliers work better with different rings.
On a second hand rod: -
check the spigots (joints) for any looseness or wear and tear - stick your finger (cotton-bud) down to see if there's sand or other crap trapped in the holes, not a good sign
check the rings are aligned correctly and have no been replaced or if they have, ask who did it, when and why...
check that there are no cracks on the internal coating on the rings (will snap a line in every cast or tear it to death slowly)
check the rod is the correct length (one of mine is a few inches shorter owing to a car door!)
If there is a reel seat, check it also for cracks and any corrosion and that its works properly
If there is no reel seat, are you getting the coasters that you will use to connect the reel to the rod?
http://www.ebay.com/gds/Used-Fishing-Rod-Buying-Guide-/ might be of use although its primarily aimed at fresh water rods
Hope that helps...
-
keithelliott
- SAI Lug Worm
- Posts: 49
- Joined: Sun Apr 17, 2016 11:17 pm
- Has thanked: 1 time
- Been thanked: 5 times
Re: new rods
I bought a spinning rod combo of henrystackleshop.ie
It's a great little shop and the staff where very friendly too,
It's a great little shop and the staff where very friendly too,
-
ardinn
- SAI Hammerhead
- Posts: 352
- Joined: Tue Jan 20, 2015 2:42 am
- Favourite Rod: Distance Salt
- Favourite Reel: Sblaster 7k
- Favourite Fish: Bass of course!
- Location: Carlow
- Has thanked: 34 times
- Been thanked: 60 times
Re: new rods
I bought a 2nd hand rod recently and it snapped first cast - I had checked it and found nothing the matter with it at purchase so to add to Kierans point above, get the seller to put a bend in it for you - A good one at that!!
-
ste c
- SAI Megalodon!
- Posts: 1404
- Joined: Sat Apr 17, 2010 6:01 pm
- Favourite Rod: zziplex full tournament
- Favourite Reel: saltist 20bg,fathom 15s
- Favourite Fish: cod,ray,
- Location: dublin
- Has thanked: 2 times
- Been thanked: 189 times
Re: new rods
ardinn wrote:I bought a 2nd hand rod recently and it snapped first cast - I had checked it and found nothing the matter with it at purchase so to add to Kierans point above, get the seller to put a bend in it for you - A good one at that!!
What second hand rod did you buy
-
keith
- SAI Megalodon!
- Posts: 1151
- Joined: Wed Sep 05, 2007 10:00 pm
- Location: Meath
- Has thanked: 81 times
- Been thanked: 85 times
Re: new rods
http://swordsanglingcentre.com/Rods Lots of very good quality rods in there within your price range.
-
beachbuddy
- SAI Megalodon!
- Posts: 1296
- Joined: Sun Nov 25, 2007 5:59 pm
- Location: EAST CORK
- Has thanked: 199 times
- Been thanked: 186 times
Re: new rods
Getting a seller to put a good bend in a rod is all fine and well if you meet a person in the flesh and for what its worth I wouldn't recommend anyone to go "bending" any of the finer tip beachcasters ie continental style as they are not designed to be forced against ceilings or pulled down aggressively and if I was selling one I personally wouldn't do it for love nor money.Have a look on you tube to see the way lads test finer tip rods,they use their index finger to pull down gently.Unfortunately even with high end[sometimes brand new] fishing rods tips can snap .However on the more traditional uk style beachcasters a person should be able to be a little bit firmer if testing tips.ardinn wrote:I bought a 2nd hand rod recently and it snapped first cast - I had checked it and found nothing the matter with it at purchase so to add to Kierans point above, get the seller to put a bend in it for you - A good one at that!!