Can anyone tell me how to fit break blocks to a daiwa sl30sh. I stripped it down and cleaned it all out and greased and re-assembled it 2 nights ago and took it out for a cast last night. It's working fine but it's just hard to control. I bought it new and never fitted the break blocks so i want to put them in to see would it solve the problem some bit. Can't seem to find much info online for that type of reel.
Cheers,
Evan
Fitting break blocks to sl30sh?
Moderator: donal domeney
-
evan699
- SAI Sea Dog!
- Posts: 601
- Joined: Tue May 12, 2009 4:11 pm
- Favourite Rod: Greys grx-s
- Favourite Reel: Daiwa 7ht mag
- Favourite Fish: Wrasse
- Location: cork city
- Has thanked: 15 times
- Been thanked: 19 times
Fitting break blocks to sl30sh?
Species 2014: whiting, coalie, pouting, codling, pollack, ballan wrasse, dab, poor cod, mackerel, grey gurnard, conger, ling, cuckoo wrasse, launce, common skate, bass, scad, garfish, blue shark
Species 2015: Ballan wrasse, poor cod, pollack, ling, flounder, turbot, mackerel, whiting, lsd, dab, grey gurnard, pouting, cuckoo wrasse, cod
Species 2015: Ballan wrasse, poor cod, pollack, ling, flounder, turbot, mackerel, whiting, lsd, dab, grey gurnard, pouting, cuckoo wrasse, cod
Entries now open for the All Ireland Shore Cod Championships on November 29th hosted by Sea Angling Ireland SAC
-
fishermannum1
- SAI Megalodon!
- Posts: 1921
- Joined: Tue Oct 23, 2007 7:14 pm
- Favourite Rod: century blackbirb
- Favourite Reel: abu 6500 c3 ct
- Favourite Fish: in batter!!!!!
- Location: Derry'
- Has thanked: 7 times
- Been thanked: 14 times
Re: Fitting break blocks to sl30sh?
evan699 if you take the side plate off you will see a thin silver bar. just slip a block on each side of it, heres a photo of the bar, as you can see i have only one fitted, but if she is too fast you can add two.
You do not have the required permissions to view the files attached to this post.
as ole rab c said " see me' see the sea' i love the sea me"
right i'am off for a swally!!!!!!! so were's the F***'n purse!!!!!!!
right i'am off for a swally!!!!!!! so were's the F***'n purse!!!!!!!
-
evan699
- SAI Sea Dog!
- Posts: 601
- Joined: Tue May 12, 2009 4:11 pm
- Favourite Rod: Greys grx-s
- Favourite Reel: Daiwa 7ht mag
- Favourite Fish: Wrasse
- Location: cork city
- Has thanked: 15 times
- Been thanked: 19 times
Re: Fitting break blocks to sl30sh?
Thanks. I fittet the two and i'll give it a try for a while and drop down to one and see how that goes. Lookin forward to givin it a run now.fishermannum1 wrote:evan699 if you take the side plate off you will see a thin silver bar. just slip a block on each side of it, heres a photo of the bar, as you can see i have only one fitted, but if she is too fast you can add two.
Species 2014: whiting, coalie, pouting, codling, pollack, ballan wrasse, dab, poor cod, mackerel, grey gurnard, conger, ling, cuckoo wrasse, launce, common skate, bass, scad, garfish, blue shark
Species 2015: Ballan wrasse, poor cod, pollack, ling, flounder, turbot, mackerel, whiting, lsd, dab, grey gurnard, pouting, cuckoo wrasse, cod
Species 2015: Ballan wrasse, poor cod, pollack, ling, flounder, turbot, mackerel, whiting, lsd, dab, grey gurnard, pouting, cuckoo wrasse, cod