taking rod apart

Come on now, ante up! Give us your tips and tricks, those little snippets and trade secrets gleaned from years of experience and experimentation!

Moderator: Seaniebo

Message
Author
okuma

taking rod apart

#1 Post by okuma »

hi,any ideas o tricks to assamble the rods on your own then is nobody on the beach and they really stuck
Top
User avatar
MC
SAI Megalodon!
Posts: 3854
Joined: Sat Nov 04, 2006 10:21 pm
Favourite Rod: zziplex profile
Favourite Reel: fishing 525,casting abu5500
Favourite Fish: at the minute, any t
Location: Derry
Has thanked: 215 times
Been thanked: 101 times

#2 Post by MC »

dry the rod and use a towel and twist gently, don't pull on the eyes as they will bend or come off
Top
okuma

yeap

#3 Post by okuma »

sometimes it works,but not all the times i think if that doesnt helps the only way would be wait for the firs visitor and ask for help, thanks for advise
Top
User avatar
Seaniebo
Unstoppable....
Posts: 1338
Joined: Tue Sep 14, 2004 2:15 pm
Favourite Fish: Whiting
Location: Donegal and Dublin
Has thanked: 105 times
Been thanked: 51 times

#4 Post by Seaniebo »

If you have a freezer pack with you for keeping bait frozen, try rubbing that around the spigot for a few minutes.
I require a tremendous amount of calcium

http://www.saisac.org/
Top
okuma

.

#5 Post by okuma »

thank you will try
Top
User avatar
blaker
SAI Sea Dog!
Posts: 535
Joined: Sun Feb 20, 2005 8:57 pm
Location: Dublin/Courtmacsherry

#6 Post by blaker »

I have a Penn INXS thats been stuck together for 6 or so months now. Obviously this makes transportation somewhat difficult! I've tried hot and cold running water on it, various greases and solvents, brute force, staring and muttering and nothing has worked.
“........if people from Leinster support Munster, it’s actually good as it has separated those who really want to support us from the fickle ones, which means the base is being built on a solid core of support. If it’s based on fly-by supporters, that’s not a good foundation – as they say, rats will always jump first from a sinking ship.” Denis Hickie, Disco Legend
Top
User avatar
EoinMag
SAI Sea Dog!
Posts: 528
Joined: Mon Oct 30, 2006 8:07 pm

#7 Post by EoinMag »

A good tip is to hold the rod either side of the spigot, but behind your knees, so your arms are behind your back at knee level and you have the rod held either side of the spigot. Get your hands as close as possible together tightening your arms in on your legs, then move your knees slowly apart. It applies a lot more pressure than you could ever do just with both hands, I've always managed to get jammed rods off this way.
2008 Species: Flounder, whiting, coal fish, Dogfish, rockling, dab.
Top
User avatar
blaker
SAI Sea Dog!
Posts: 535
Joined: Sun Feb 20, 2005 8:57 pm
Location: Dublin/Courtmacsherry

#8 Post by blaker »

Yeah thats always been my approach when they got stuck but no luck this time around.
I swear to God its like its been superglued.
“........if people from Leinster support Munster, it’s actually good as it has separated those who really want to support us from the fickle ones, which means the base is being built on a solid core of support. If it’s based on fly-by supporters, that’s not a good foundation – as they say, rats will always jump first from a sinking ship.” Denis Hickie, Disco Legend
Top
pete
SAI Megalodon!
Posts: 1676
Joined: Fri Apr 23, 2004 3:04 pm
Location: Dingle/Donegal
Has thanked: 45 times
Been thanked: 32 times

#9 Post by pete »

Had that problem with a grauvell earlier on this year.....took four of us to get it apart...when it came apart the other two fell backwards into the bathroom putting the butt section through the door :lol: :oops: . Have no idea how to solve it aside from maybe a little wet and dry sandpaper
Sea Species(25) bass, codling, whiting, turbot, seatrout, stingray, pollock, coalfish, longspine scorpion, ballan wrasse, dogfish, ling, pouting, poor cod, dab, mackerel, smelt, sandeel, launce, bull huss, painted ray, thick lip mullet, golden grey mullet, rock goby.
Fresh Water (2) brown trout, sea trout
Top
User avatar
Donagh
SAI Megalodon!
Posts: 1812
Joined: Mon Sep 29, 2003 10:32 am
Favourite Rod: AA big beach
Favourite Reel: 525 mag original
Favourite Fish: Thornybacks
Location: East Limerick
Has thanked: 16 times
Been thanked: 11 times

#10 Post by Donagh »

When rods are sticking and are apart I usually fix it by wetting some kitchen towel and wiping the female joint as far up as possible as well as the male. I then dry with some more kitchen towel. Its usually carbon build up that causes the issue.

Donagh
Top
Liamo

#11 Post by Liamo »

Hi,

This might not solve your problem, it's just a general tip I know a mate of mine uses. He keeps two strips of bicycle tubing in his tackle box. If after a session a rod is jammed, he wraps the strips of rubber around the blank either side of the spigot, great grip and works every time

Liam
Top
okuma

yeap

#12 Post by okuma »

i think that the bicycle tubing-great idea, i also "paint" male joint with soft carpenters pencil before put them together,after its more easy to take apart...thanks all lads
Top

Return to “Tips & Tricks for Sea Anglers”