Penn 525 Re-engage Problem

Message

Liamo · #1 Post by **Liamo** » Thu Aug 02, 2007 11:22 am

Lads,

I have a penn 525 and since the day I bought it I have had trouble with the anti-reverse mechanism. After casting when I take the reel back out of freespool the spool continues to turn (and I can hear a kind of clicking sound). I have to turn the handle to re-engage the spool properly. I searched through old posts here and found mention of similar problems. I was going to just send the reel off to Penn but was wondering if anyone has a quick fix or two I could try first

... a few people have pointed at the anti-reverse bearing as a probable cause of the problem. Where is this situated in the reel?

Liam

#2 Post by **rapalajoe** » Fri Aug 03, 2007 1:33 am

The only things that show IAR bearing have a problem is the crank handle can be move two ways,forward and backwards.What I mean is the spool is engage,but when the line is pull out from the spool,the handle will turn backwards.I dont quite understand when u say that u have to turn the handle to re-engage the spool properly.From what i understand is that its look like that the spool is not engage properly.

#3 Post by **m.b3** » Fri Aug 03, 2007 2:21 am

Liamo wrote:Lads,

I have a penn 525 and since the day I bought it I have had trouble with the anti-reverse mechanism. After casting when I take the reel back out of freespool the spool continues to turn (and I can hear a kind of clicking sound). I have to turn the handle to re-engage the spool properly. I searched through old posts here and found mention of similar problems. I was going to just send the reel off to Penn but was wondering if anyone has a quick fix or two I could try first

... a few people have pointed at the anti-reverse bearing as a probable cause of the problem. Where is this situated in the reel?

Liam

friend had a problem like this. took the reel apart twice and couldn't find what the problem is. would be very curious to know?

Rockhopper · #4 Post by **Rockhopper** » Fri Aug 03, 2007 8:06 am

Liamo,

Ask Neil Mackellow, he will know what the problem is... http://neilsforum.marsh-tackle.co.uk/forum/

Tom.

Rockhopper · #5 Post by **Rockhopper** » Fri Aug 03, 2007 12:19 pm

Liamo,

I forgot I had this....it may help you out.....

http://www.youtube.com:80/watch?v=YFX_71Ah-Pw

Perhaps the mods could add it to the stickies for future reference.

Tom.

Liamo · #6 Post by **Liamo** » Fri Aug 03, 2007 1:47 pm

Tom,

Thanks for those links. That video is brillaint. Very very good but the background music is funny - makes the whole thing feel like a very relaxing and enjoyable experience!

Have posted my problem on that forum too. If I get an answer that works I'll stick it on this thread for future reference

Thanks a million,
Liam

Rockhopper · #7 Post by **Rockhopper** » Fri Aug 03, 2007 6:31 pm

Aye! yer right about the music....brings new meaning to tune a reel :lol: :lol: :lol: :lol: Sheeite Terry!!! 8) (my Dublin accent)

Tom.

#8 Post by **roger de dodger** » Sat Aug 04, 2007 8:26 am

sounds like to much grease on the drive cog have you opened up the reel ?

Sea Angling Ireland

Penn 525 Re-engage Problem

Penn 525 Re-engage Problem

Re: Penn 525 Re-engage Problem